-
On Sale Today!
The Easy Pond consists of a one piece lightweight Poly-Basin with 6 concrete coping caps which can be ordered in any of our signature finishes. Just place the Poly-Basin on a hard surface, and install the coping caps over the edge of the basin. This will work with most fountains for a superb display.
- Easy to ship
- Easy to install
- Easy to maintain
- Easy to enjoy!
All you need is a crushed gravel and sand base — a concrete base is not needed. If installing on a solid base, such as pavers or concrete, you will need to place a 1″ sand layer over the concrete to ease the installation and leveling.
This can be used with just about any fountain shown with a pond. It’ll support bog and shallow-water aquatic plants. Contact us to discuss your configuration.
-
On Sale Today!
This pool is good for bog and shallow-water plants. Or, add a fountain in the center for a dynamic display. It is perfect as a serene reflecting pool.
-
On Sale Today!
Easy to install — Beautiful to look at.
The Easy Pond consists of a one piece lightweight Poly-Basin with 8 concrete coping caps which can be ordered in any of our signature finishes. Just place the Poly-Basin on a hard surface, and install the coping caps over the edge of the basin. This will work with most fountains for a superb display.
- Easy to ship
- Easy to install
- Easy to maintain
Can be used with just about any fountain shown with a pond. Contact us to discuss your configuration.
-
On Sale Today!
-
Patch or Seam Tape is sold per Foot. It’s a black rubber-like tape that comes in 6 inch widths. It will patch cuts and holes. This can be sued to seam small sections of liners to form a watertight seal. Must be applied to clean dry liner.
-
On Sale Today!
-
On Sale Today!
This pond is easy to install and beautiful to look at.
The Easy Pond consists of a one piece lightweight Poly-Basin with 6 concrete coping caps which can be ordered in any of our signature finishes. Just place the Poly-Basin on a hard surface, and install the coping caps over the edge of the basin. This will work with most fountains for a superb display.
- Easy to ship
- Easy to install
- Easy to maintain
- Easy to enjoy!
All you need is a crushed gravel and sand base — a concrete base is not needed. If installing on a solid base, such as pavers or concrete, you will need to place a 1″ sand layer over the concrete to ease the installation and leveling.
This can be used with just about any fountain shown with a pond. It’ll support bog and shallow-water aquatic plants. Contact us to discuss your configuration.
-
On Sale Today!
This elegant Grande Palazzo pond can be used for a fountain display or a water garden with shallow-water plants. Made of ever-lasting cast stone with a fiberglass inner pool, it will amaze your neighbors and guests.
-
On Sale Today!
This pond is made for water features such as spray rings or water fountain statues, or to be simply used as a reflection pool. If you are considering using it as a water garden, then consider the depth of the pool.
If you are planning a fountain display in the “pond”, then do not grow water lilies near the “moving” water or disturbed water that is caused by the spray. Water lilies prefer calm, placid water which is why waterfalls should be installed away from your aquatics.
The minimum depth to sustain water lilies depends on the design. Check out the section “Tub Garden Plants and Supplies” for aquatic plants suited for this.
