-
Protective Pond Liner Underlayment is recommended to add a protective ground barrier for the pond liner. After digging, especially if you encounter rocks, roots, or other objects, this light weight durable underlayment will protect the liner from settling damage. This underlayment is placed directly on the excavation prior to placing the liner. Select the amount of underlayment needed to cover the ground excavation. The liner will then set on top. You may need to section pieces to best cover the excavation.
-
Patch or Seam Tape is sold per Foot. It’s a black rubber-like tape that comes in 6 inch widths. It will patch cuts and holes. This can be sued to seam small sections of liners to form a watertight seal. Must be applied to clean dry liner.
-
Bring the soothing nature of a small indoor fountain with small pond plants into your home with this tabletop fountain. It can be used outdoors, too.
-
These kits encompass all the necessary elements required, facilitating a hassle-free pond construction process devoid of any perplexity.
-
On Sale Today!
Need a deeper pond? Then either consider a larger size or make this one smaller. If you want a deeper pond, say 3-ft, then subtract the difference (3 – 2 = 1-ft) and multiply by 2 giving 2-ft to add on each horizontal dimension.
E.g., to deepen an 8’ft x 11’ft x 2′ to 3′ deep, the horizontal dimension would be 6′ x 9′.
Or, a larger size kit of 11′ x 16′ would be 9′ x 14′ if the depth were increased by 1′.
-
On Sale Today!
Need a deeper pond? Then either consider a larger size or make this one smaller.
If you need a deeper pond for a given kit, say 3-ft instead of 2-ft, then subtract the difference (3 – 2 = 1-ft) and multiply by 2 giving 2-ft to add on each horizontal dimension.
E.g., to deepen an 8′ x 11′ x 2′ to be 3′ deep, then the horizontal dimension would be 6′ x 9′.
Or, a larger size kit of 11′ x 16′ would be 9′ x 14′ if the depth were increased by 1′. That could leave some liner for overlap at the edges.
-
On Sale Today!
Need a deeper pond? Then either consider a larger size or make this one smaller.
If you want a deeper pond for a given kit, say 3-ft instead of 2-ft, then subtract the difference (3 – 2 = 1-ft) and multiply by 2 giving 2-ft to add on each horizontal dimension.
E.g., to deepen an 8′ x 11′ x 2′ to be 3′ deep, then the horizontal dimension would be 6′ x 9′.
Or, a larger size kit of 11′ x 16′ would be 9′ x 14′ if the depth were increased by 1′. That could leave some liner for overlap at the edges.
-
On Sale Today!
Need a deeper pond? Then either consider a larger size or make this one smaller.
If you want a deeper pond for a given kit, say 3-ft instead of 2-ft, then subtract the difference (3 – 2 = 1-ft) and multiply by 2 giving 2-ft to add on each horizontal dimension.
E.g., to deepen an 8′ x 11′ x 2′ to be 3′ deep, then the horizontal dimension would be 6′ x 9′.
Or, a larger size kit of 11′ x 16′ would be 9′ x 14′ if the depth were increased by 1′. That could leave some liner for overlap at the edges.
-
On Sale Today!
Transform your entry into a unique scene with thus DIY Backyard Waterfall Kit. This all-in-one kit includes everything you need to create a stunning pondless waterfall, bringing the soothing sounds and captivating beauty of cascading water to your yard.
-
The Aqua Garden Mini Pond Kit is a super easy way to bring the beauty and tranquility of a water garden to any spot you choose. You have the freedom to personalize your Aqua Garden with countless design choices. You can add all sorts of plants, rocks, pieces of driftwood, or even some colorful fish to make your own unique underwater haven.
Tub stand and standalone grow light are sold separately.
This does come with a light for the waterfall.
-
Wouldn’t you love to have your own water garden but don’t think you have the space? Consider a tub water garden.
This is perfect for your new hobby of Tub Water Gardening. It can be set in your backyard, porch, or any sunny location, even on a sturdy balcony. Fill it with aquatic plants and a small goldfish or two. We’re sure that you will admire the marvelous world of water gardening.
The tub is black rigid polyethylene. It’s resistant to cracking, peeling, and fading.
-
Consider a tub garden for your entryway, sturdy balcony or other small space. This light-weight resin 1/2 Wine Barrel Tub is molded to give the look of a wooden wine barrel but will not fall apart like the wooden wine barrels do. It has no metal that can rust.
Just fill it with water, add your plants and you will have an instant tub water garden pool with wonderful water lilies blooming.
9 pounds without water.
15″ high x 22″ diameter.
25 gallons of water.
-
These fish-friendly AquaTough™ rubber pond liners are flexible, has long-term durability, and easy to install. They are an ideal choice for a variety of waterscape applications including backyard water gardens.
This liner has the added benefit of J-Tear protection.When the J-Tear test is successful the sheet will tear in the direction ofthe cut for a short distance and then it will change direction and attemptto curve back on itself. The direction change is important during the membrane installation process. As the installer works around protrusions, the J-tear stops the membrane from tearing as they install the sheet. Or, as you can see withthe competitor’s membrane, the tear will continue down the length of themembrane.
These extra-large AquaTough pond liners are perfect for very large water gardens. These are perfect for condominiums, businesses, parks and other large displays. They are high quality and proven to last.
Estimating Your Pool Liner Size.
- Determine the length, width and depth in feet. E.g., 5 ft x 6 ft x 3 ft deep.
- To the width (5 ft) and to the length (6 ft), add 2 x depth (2 x 3 ft = 6) plus 1 foot for overlap at the pond’s rim. For example,Dimension #1: 5 (width) + 6 (2 x depth) + 1 (edge overlap) = 12 ft.Dimension #2: 6 (length) + 6 (2 x depth) + 1 (edge overlap) = 13-ft.You would need at least a 12 x 13-ft size. If you buy larger, you’ll have room for more overlap at the pond’s edge or error in estimating too small width and/or length.
-
Sold Out
These fish-friendly AquaTough™ rubber pond liners are flexible, has long-term durability, and easy to install. They are an ideal choice for a variety of waterscape applications including backyard water gardens.
This liner has the added benefit of J-Tear protection.When the J-Tear test is successful the sheet will tear in the direction ofthe cut for a short distance and then it will change direction and attemptto curve back on itself. The direction change is important during the membrane installation process. As the installer works around protrusions, the J-tear stops the membrane from tearing as they install the sheet. Or, as you can see withthe competitor’s membrane, the tear will continue down the length of themembrane.
These extra-large AquaTough pond liners are perfect for very large water gardens. These are perfect for condominiums, businesses, parks and other large displays. They are high quality and proven to last.
Estimating Your Pool Liner Size.
- Determine the length, width and depth in feet. E.g., 5 ft x 6 ft x 3 ft deep.
- To the width (5 ft) and to the length (6 ft), add 2 x depth (2 x 3 ft = 6) plus 1 foot for overlap at the pond’s rim. For example,
Dimension #1: 5 (width) + 6 (2 x depth) + 1 (edge overlap) = 12 ft.
Dimension #2: 6 (length) + 6 (2 x depth) + 1 (edge overlap) = 13-ft.
You would need at least a 12 x 13-ft size. If you buy larger, you’ll have room for more overlap at the pond’s edge or error in estimating too small width and/or length.
-
On Sale Today!
The Easy Pond consists of a one piece lightweight Poly-Basin with 6 concrete coping caps which can be ordered in any of our signature finishes. Just place the Poly-Basin on a hard surface, and install the coping caps over the edge of the basin. This will work with most fountains for a superb display.
- Easy to ship
- Easy to install
- Easy to maintain
- Easy to enjoy!
All you need is a crushed gravel and sand base — a concrete base is not needed. If installing on a solid base, such as pavers or concrete, you will need to place a 1″ sand layer over the concrete to ease the installation and leveling.
This can be used with just about any fountain shown with a pond. It’ll support bog and shallow-water aquatic plants. Contact us to discuss your configuration.
-
On Sale Today!
This pool is good for bog and shallow-water plants. Or, add a fountain in the center for a dynamic display. It is perfect as a serene reflecting pool.
-
On Sale Today!
Easy to install — Beautiful to look at.
The Easy Pond consists of a one piece lightweight Poly-Basin with 8 concrete coping caps which can be ordered in any of our signature finishes. Just place the Poly-Basin on a hard surface, and install the coping caps over the edge of the basin. This will work with most fountains for a superb display.
- Easy to ship
- Easy to install
- Easy to maintain
Can be used with just about any fountain shown with a pond. Contact us to discuss your configuration.
-
On Sale Today!
-
On Sale Today!
-
On Sale Today!
This pond is easy to install and beautiful to look at.
The Easy Pond consists of a one piece lightweight Poly-Basin with 6 concrete coping caps which can be ordered in any of our signature finishes. Just place the Poly-Basin on a hard surface, and install the coping caps over the edge of the basin. This will work with most fountains for a superb display.
- Easy to ship
- Easy to install
- Easy to maintain
- Easy to enjoy!
All you need is a crushed gravel and sand base — a concrete base is not needed. If installing on a solid base, such as pavers or concrete, you will need to place a 1″ sand layer over the concrete to ease the installation and leveling.
This can be used with just about any fountain shown with a pond. It’ll support bog and shallow-water aquatic plants. Contact us to discuss your configuration.
-
On Sale Today!
This elegant Grande Palazzo pond can be used for a fountain display or a water garden with shallow-water plants. Made of ever-lasting cast stone with a fiberglass inner pool, it will amaze your neighbors and guests.
-
On Sale Today!
This pond is made for water features such as spray rings or water fountain statues, or to be simply used as a reflection pool. If you are considering using it as a water garden, then consider the depth of the pool.
If you are planning a fountain display in the “pond”, then do not grow water lilies near the “moving” water or disturbed water that is caused by the spray. Water lilies prefer calm, placid water which is why waterfalls should be installed away from your aquatics.
The minimum depth to sustain water lilies depends on the design. Check out the section “Tub Garden Plants and Supplies” for aquatic plants suited for this.
-
On Sale Today!
Eight (8) planters come with this pond coping. The coping does not have a bottom. You will need to ensure your foundation is secure enough to accept this pond when filled with water.
These ponds are made for water features such as spray rings or water fountain statues, or to be simply used as a reflection pool. If you are considering using it as a water garden, then consider the depth of the pool.
If you are planning a fountain display in the “pond”, then do not grow water lilies near the “moving” water or disturbed water that is caused by the spray. Water lilies prefer calm, placid water which is why waterfalls should be installed away from your aquatics.
The minimum depth to sustain water lilies depends on the design. Water lilies can grow in “tub” gardens which we sell the containers to make tub gardens. Our Pygmy Lilies can easily grow in only a few inches of water over the surface of the crown (thus for depth you have add the pot size) and can easily grow in 12″ of water.
-
On Sale Today!
About This Pond
These ponds are made for water features such as spray rings or water fountain statues, or to be simply used as a reflection pool. If you are considering using it as a water garden, then consider the depth of the pool.
If you are planning a fountain display in the “pond”, then do not grow water lilies near the “moving” water or disturbed water that is caused by the spray. Water lilies prefer calm, placid water which is why waterfalls should be installed away from your aquatics.
The minimum depth to sustain water lilies depends on the design. Water lilies can grow in “tub” gardens which we sell the containers to make tub gardens. Our Pygmy Lilies can easily grow in only a few inches of water over the surface of the crown (thus for depth you have add the pot size) and can easily grow in 12″ of water. The best plants would be the Dwarf Giant Papyrus, Hardy Shallow Water and Bog Plants and Water Hyacinths. Oh, and don’t forget the fish for bio-equilibrium. For more ideas, email us or phone us at 1-800-524-3492.
-
Imagine a serene sanctuary in your backyard, a place to find peace amidst nature’s beauty. Our Cast Stone Ponds can create this oasis for you.
These elegantly crafted ponds not only add visual intrigue to your landscape, but provide a space for quiet reflection. Listen to the soothing babble of a spillover fountain or watch delicate lily pads drift across the still water. Our ponds allow you to cultivate water plants and create a thriving aquatic ecosystem. Bring the tranquility of water into your life.
Our Cast Stone Ponds transform backyards into personal Edens. Discover for yourself the joy and relaxation our ponds can bring.
-
On Sale Today!
Easy to install — Beautiful to look at.
The Easy Pond consists of a one piece lightweight Poly-Basin with 6 concrete coping caps which can be ordered in any of our signature finishes. Just place the Poly-Basin on a hard surface, and install the coping caps over the edge of the basin. This will work with most fountains for a superb display.
- Easy to ship
- Easy to install
- Easy to maintain
All you need is a crushed gravel and sand base — a concrete base is not needed. If installing on a solid base, such as pavers or concrete, you will need to place a 1" sand layer over the concrete to ease the installation and leveling.
Can be used with just about any fountain shown with a pond. Contact us to discuss your configuration.
-
-
On Sale Today!
Coping is a beautiful way to have a pond fountain with that professional look. This octagonal coping will need to be bonded together and installed on a foundation for the pool bottom (there is no bottom to coping). Coping can also be used for tree rings or elegant garden beds.
This pond coping comes in several magnificent color finishes is to match your design. Use to design your own reflecting pond, add some water lilies or even a nice fountain statue.
About This Pond
These ponds are made for water features such as spray rings or water fountain statues, or to be simply used as a reflection pool. If you are considering using it as a water garden, then consider the depth of the pool.
If you are planning a fountain display in the “pond”, then do not grow water lilies near the “moving” water or disturbed water that is caused by the spray. Water lilies prefer calm, placid water which is why waterfalls should be installed away from your aquatics.
The minimum depth to sustain water lilies depends on the design. Water lilies can grow in “tub” gardens which we sell the containers to make tub gardens. Our Pygmy Lilies can easily grow in only a few inches of water over the surface of the crown (thus for depth you have add the pot size) and can easily grow in 12″ of water. The best plants would be the Dwarf Giant Papyrus, Hardy Shallow Water and Bog Plants and Water Hyacinths. Oh, and don’t forget the fish for bio-equilibrium. For more ideas, email us or phone us at 1-800-524-3492.
-
On Sale Today!
Disappearing fountains are the trend these days. Place your water feature atop this buried pond and the water flows from the fountain into the ground where the pump resides to recirculate the water back to the top. This is suitable for any overflowing water feature where the water falls into the underground pond interior. The walls are 1.5-2" thick so compensate for that when designing your disappearing fountain.
About This Pond
These ponds are made for water features such as spray rings or water fountain statues, or to be simply used as a reflection pool. If you are considering using it as a water garden, then consider the depth of the pool.
If you are planning a fountain display in the “pond”, then do not grow water lilies near the “moving” water or disturbed water that is caused by the spray. Water lilies prefer calm, placid water which is why waterfalls should be installed away from your aquatics.
The minimum depth to sustain water lilies depends on the design. Water lilies can grow in “tub” gardens which we sell the containers to make tub gardens. Our Pygmy Lilies can easily grow in only a few inches of water over the surface of the crown (thus for depth you have add the pot size) and can easily grow in 12″ of water. The best plants would be the Dwarf Giant Papyrus, Hardy Shallow Water and Bog Plants and Water Hyacinths. Oh, and don’t forget the fish for bio-equilibrium. For more ideas, email us or phone us at 1-800-524-3492.
